R1EX25008Axx00A/R1EX25016Axx00A
Data Protect
The protection features of the device are summarized in the following table. When the Status Register Write Disable
(SRWD) bit of the Status Register is 0 (its initial delivery state), it is possible to write to the Status Register provided
that the Write Enable Latch (WEL) bit has previously been set by a Write Enable (WREN) instruction, regardless
weather write protect ( W ) is driven high or low.
When the Status Register Write Disable (SRWD) bit of the Status Register is set to 1, two cases need to be considered,
depending on the state of write protect ( W ):
? If write protect ( W ) is driven high, it is possible to write to the Status Register provided that the Write Enable
Latch (WEL) bit has previously been set by a Write Enable (WREN) instruction.
? If write protect ( W ) is driven low, it is not possible to write to the Status Register even if the Write Enable Latch
(WEL) bit has previously been set by a Write Enable (WREN) instruction. (Attempts to write to the Status
Register are rejected, and are not accepted for execution). As a consequence, all the data bytes in the memory
area that are software protected (SPM) by the Block Protect (BP1, BP0) bits of the Status Register, are also
hardware protected against data modification.
Regardless of the order of the two events, the Hardware Protected Mode (HPM) can be entered:
? By setting the Status Register Write Disable (SRWD) bit after driving write protect ( W ) low.
? By driving write protect ( W ) low after setting the Status Register Write Disable (SRWD) bit.
The only way to exit the Hardware Protected Mode (HPM) once entered is to pull write protect ( W ) high.
If write protect ( W ) is permanently tied high, the Hardware Protected Mode (HPM) can never be activated, and only the
Software Protected Mode (SPM), using the Block Protect (BP1, BP0) bits of the Status Register, can be used.
Write Protected Block Size
Status register bits
Array addresses protected
0
0
1
1
BP1
0
1
0
1
BP0
Protected blocks
None
Upper quarter
Upper half
Whole memory
R1EX25016A
None
600h ? 7FFh
400h ? 7FFh
000h ? 7FFh
R1EX25008A
None
300h ? 3FFh
200h ? 3FFh
000h ? 3FFh
Protection Modes
Write protection of the
Memory protect
W signal
SRWD bit
Mode
status register
Protected area * 1
Unprotected area * 1
1
0
Software
Status register is writable Write protected
Ready to accept Write
protected (SPM) (if the WREN) instruction
has set the WEL bit).
The values in the BP1
and BP0 bits can be
changed.
instructions
0
1
0
1
0
1
Hardware
Status register is
Write protected
Ready to accept Write
protected (HPM) hardware write
protected. The values in
the BP1 and BP0 bits
cannot be changed.
instructions
Note:
1. As defined by the values in the Block Protected (BP1, BP0) bits of the Status Register, as shown in the
former table.
REJ03C0385-0100 Rev.1.00 Jul.22.2009
Page 17 of 20
相关PDF资料
R1EX25064ASA00A#S0 IC EEPROM 64K 5MHZ 8SOP
R1EX25512ATA00A#S0 IC EEPROM 512K 5MHZ 8TSSOP
RA1P011FP1 CONN PLUG 11POS STRAIGHT GOLD
RACD03-700 LED DRIVER 3W 10-43V OUT SGL
RACD06-700 LED DRIVER 6W 3-8.5V OUT LED DR
RACD12-500 LED DRIVER 0.5AOUT 3-24VDC OUT
RACD20-350D LED DRIVER 230VAC 2X(3-34)V OUT
RACD20-700 LED DRIVER 0.7AOUT 100-240VAC
相关代理商/技术参数
R1EX25016ASA00G 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:Serial Peripheral Interface 8k EEPROM 16k EEPROM
R1EX25016ASA00GU0 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:Serial Peripheral Interface 8k EEPROM 16k EEPROM
R1EX25016ASA00I 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:Serial Peripheral Interface 8k EEPROM (1024-word × 8-bit) 16k EEPROM (2048-word × 8-bit) Electrically Erasable and Programmable Read Only Memory
R1EX25016ASA00I#S0 制造商:Renesas Electronics Corporation 功能描述:SERIAL EEPROM 16K, SPI, SOP8, 制造商:Renesas Electronics Corporation 功能描述:SERIAL EEPROM 16K, SPI, SOP8, I-GRADE - Tape and Reel 制造商:Renesas Electronics Corporation 功能描述:IC EEPROM 16KBIT 5MHZ 8SOP
R1EX25016ATA00A#S0 功能描述:IC EEPROM 16K 5MHZ 8TSSOP RoHS:是 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:1 系列:- 格式 - 存储器:闪存 存储器类型:闪存 - NAND 存储容量:4G(256M x 16) 速度:- 接口:并联 电源电压:2.7 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:48-TFSOP(0.724",18.40mm 宽) 供应商设备封装:48-TSOP I 包装:Digi-Reel® 其它名称:557-1461-6
R1EX25016ATA00G 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:Serial Peripheral Interface 8k EEPROM 16k EEPROM
R1EX25016ATA00GU0 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:Serial Peripheral Interface 8k EEPROM 16k EEPROM
R1EX25016ATA00I 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:Serial Peripheral Interface 8k EEPROM (1024-word × 8-bit) 16k EEPROM (2048-word × 8-bit) Electrically Erasable and Programmable Read Only Memory